English Polish New customer? Login Contact   
  
  

SRM 3600 DIN  Sprayout-Safety-Steel-Ring DIN

Print data sheet Make an inquiry
This range is designed for installation over flange joints to prevent injury and damage in the event of a hazardous spray out.
Steel Rings SRM 3600 are used for high temperature and/or pressure applications when PP spray shields are unsuitable for the design conditions.

Stainless steel spray shields in 316 are suitable for maximum operating temperature of 1100 °C and maximum operating pressures of 240 bar.

Stainless steel ASTM 316 for high temperature resistance.

Sizes up to DN 600.

Material : Stainless steel ASTM 316

Sprayout-Safety-Steel-Ring DIN

Nominal
Size 		150 lbs. 300 lbs. 400 lbs. 600 lbs. Flange
Diameter
BSP
D 		Flange
Diameter
Inch
D 		Ring
Width
B 		Article No. Selection
DN 10 75.0 50.0   SRM DN 10/PN 6
DN 10 90.0 90.0 90.0 90.0 50.0   SRM DN 10/PN 10-40
DN 10 90.0 90.0 90.0 90.0 70.0   SRM DN 10/PN 10-40
DN 10 100.0 100.0 50.0   SRM DN 10/PN 64-100
DN 15 80.0 50.0   SRM DN 15/PN 6
DN 15 95.0 95.0 95.0 95.0 50.0   SRM DN 15/PN 10-40
DN 15 95.0 95.0 95.0 95.0 70.0   SRM DN 15/PN 10-40
DN 15 105.0 105.0 50.0   SRM. DN 15/PN 64-100
DN 15 105.0 105.0 70.0   SRM DN 15/PN 64-100
DN 20 90.0 50.0   SRM DN 20/PN 6
DN 20 90.0 70.0   SRM DN 20/PN 6
DN 20 105.0 105.0 105.0 105.0 50.0   SRM. DN 20/PN 10-40
DN 20 105.0 105.0 105.0 105.0 70.0   SRM DN 20/PN 10-40
DN 25 100.0 50.0   SRM DN 25/PN 6
DN 25 115.0 115.0 115.0 115.0 50.0   SRM. DN 25/PN 10-40
DN 25 115.0 115.0 115.0 115.0 70.0   SRM. DN 25/PN 10-40
DN 25 140.0 140.0 50.0   SRM. DN 25/PN 64-100
DN 25 140.0 140.0 70.0   SRM DN 25/PN 64-100
DN 32 120.0 50.0   SRM DN 32/PN 6
DN 32 140.0 140.0 140.0 140.0 50.0   SRM. DN 32/PN 10-40
DN 32 140.0 140.0 140.0 140.0 70.0   SRM DN 32/PN 10-40
DN 40 130.0 50.0   SRM DN 40/PN 6
DN 40 150.0 150.0 150.0 150.0 50.0   SRM. DN 40/PN 10-40
DN 40 150.0 150.0 150.0 150.0 70.0   SRM DN 40/PN 10-40
DN 40 170.0 170.0 50.0   SRM DN 40/PN 64-100
DN 50 140.0 50.0   SRM. DN 50/PN 6
DN 50 140.0 70.0   SRM DN 50/PN 6
DN 50 165.0 165.0 165.0 165.0 50.0   SRM. DN 50/PN 10-40
DN 50 165.0 165.0 165.0 165.0 70.0   SRM. DN 50/PN 10-40
DN 50 180.0 50.0   SRM DN 50/PN 64
DN 50 195.0 50.0   SRM DN 50/PN 100
DN 65 160.0 50.0   SRM DN 65/PN 6
DN 65 160.0 70.0   SRM DN 65/PN 6
DN 65 185.0 185.0 185.0 185.0 50.0   SRM. DN 65/PN 10-40
DN 65 185.0 185.0 185.0 185.0 70.0   SRM DN 65/PN 10-40
DN 65 205.0 50.0   SRM DN 65/PN 64
DN 65 220.0 50.0   SRM. DN 65/PN 100
DN 65 220.0 70.0   SRM. DN 65/PN 100
DN 80 190.0 50.0   SRM DN 80/PN 6
DN 80 190.0 70.0   SRM DN 80/PN 6
DN 80 200.0 200.0 200.0 200.0 50.0   SRM. DN 80/PN 10-40
DN 80 200.0 200.0 200.0 200.0 70.0   SRM. DN 80/PN 10-40
DN 80 215.0 50.0   SRM DN 80/PN 64
DN 80 230.0 50.0   SRM DN 80/PN 100
DN 100 210.0 50.0   SRM DN 100/PN 6
DN 100 210.0 70.0   SRM DN 100/PN 6
DN 100 200.0 200.0 50.0   SRM. DN 100/PN 10-16
DN 100 200.0 200.0 70.0   SRM. DN 100/PN 10-16
DN 100 235.0 235.0 50.0   SRM DN 100/PN 25-40
DN 100 235.0 235.0 70.0   SRM DN 100/PN 25-40
DN 100 250.0 50.0   SRM DN 100/PN 64
DN 100 250.0 70.0   SRM DN 100/PN 64
DN 100 265.0 50.0   SRM DN 100/PN 100
DN 100 265.0 70.0   SRM DN 100/PN 100
DN 125 240.0 50.0   SRM DN 125/PN 6
DN 125 240.0 70.0   SRM DN 125/PN 6
DN 125 250.0 250.0 50.0   SRM DN 125/PN 10-16
DN 125 250.0 250.0 70.0   SRM DN 125/PN 10-16
DN 125 270.0 270.0 50.0   SRM DN 125/PN 25-40
DN 125 270.0 270.0 70.0   SRM DN 125/PN 25-40
DN 125 295.0 50.0   SRM DN 125/PN 64
DN 125 315.0 50.0   SRM DN 125/PN 100
DN 150 265.0 50.0   SRM DN 150/PN 6
DN 150 265.0 70.0   SRM DN 150/PN 6
DN 150 285.0 285.0 50.0   SRM. DN 150/PN 10-16
DN 150 285.0 285.0 70.0   SRM DN 150/PN 10-16
DN 150 300.0 300.0 50.0   SRM DN 150/PN 25-40
DN 150 300.0 300.0 70.0   SRM DN 150/PN 25-40
DN 150 345.0 50.0   SRM DN 150/PN 64
DN 150 355.0 50.0   SRM DN 150/PN 100
DN 200 320.0 50.0   SRM. DN 200/PN 6
DN 200 320.0 70.0   SRM. DN 200/PN 6
DN 200 340.0 340.0 50.0   SRM. DN 200/PN 10-16
DN 200 340.0 340.0 70.0   SRM. DN 200/PN 10-16
DN 200 360.0 50.0   SRM. DN 200/PN 25
DN 200 360.0 70.0   SRM. DN 200/PN 25
DN 200 375.0 50.0   SRM. DN 200/PN 40
DN 200 375.0 70.0   SRM. DN 200/PN 40
DN 200 415.0 50.0   SRM. DN 200/PN 64
DN 200 430.0 50.0   SRM. DN 200/PN 100
DN 250 375.0 50.0   SRM. DN 250/PN 6
DN 250 375.0 70.0   SRM. DN 250/PN 6
DN 250 395.0 50.0   SRM. DN 250/PN 10
DN 250 395.0 70.0   SRM. DN 250/PN 10
DN 250 405.0 50.0   SRM. DN 250/PN 16
DN 250 425.0 50.0   SRM. DN 250/PN 25
DN 250 425.0 70.0   SRM. DN 250/PN 25
DN 250 450.0 50.0   SRM. DN 250/PN 40
DN 250 450.0 70.0   SRM. DN 250/PN 40
DN 250 470.0 50.0   SRM. DN 250/PN 64
DN 250 505.0 50.0   SRM. DN 250/PN 100
DN 250 505.0 70.0   SRM. DN 250/PN 100
DN 300 440.0 50.0   SRM. DN 300/PN 6
DN 300 440.0 70.0   SRM. DN 300/PN 6
DN 300 445.0 50.0   SRM. DN 300/PN 10
DN 300 445.0 70.0   SRM. DN 300/PN 10
DN 300 460.0 50.0   SRM. DN 300/PN 16
DN 300 485.0 50.0   SRM. DN 300/PN 25
DN 300 485.0 70.0   SRM. DN 300/PN 25
DN 300 515.0 50.0   SRM. DN 300/PN 40
DN 300 515.0 70.0   SRM. DN 300/PN 40
DN 300 530.0 50.0   SRM. DN 300/PN 64
DN 300 585.0 50.0   SRM. DN 300/PN 100
DN 350 490.0 50.0   SRM. DN 350/PN 6
DN 350 490.0 70.0   SRM. DN 350/PN 6
DN 350 505.0 50.0   SRM. DN 350/PN 10
DN 350 505.0 70.0   SRM. DN 350/PN 10
DN 350 520.0 50.0   SRM. DN 350/PN 16
DN 350 555.0 50.0   SRM. DN 350/PN 25
DN 350 555.0 70.0   SRM. DN 350/PN 25
DN 350 580.0 50.0   SRM. DN 350/PN 40
DN 350 580.0 70.0   SRM. DN 350/PN 40
DN 350 600.0 50.0   SRM. DN 350/PN 64
DN 350 655.0 50.0   SRM. DN 350/PN 100
DN 400 540.0 50.0   SRM. DN 400/PN 6
DN 400 540.0 70.0   SRM. DN 400/PN 6
DN 400 565.0 50.0   SRM. DN 400/PN 10
DN 400 565.0 70.0   SRM. DN 400/PN 10
DN 400 580.0 50.0   SRM. DN 400/PN 16
DN 400 580.0 70.0   SRM. DN 400/PN 16
DN 400 620.0 50.0   SRM. DN 400/PN 25
DN 400 620.0 70.0   SRM. DN 400/PN 25
DN 400 660.0 50.0   SRM. DN 400/PN 40
DN 400 670.0 50.0   SRM. DN 400/PN 64
DN 400 670.0 70.0   SRM. DN 400/PN 64
DN 500 645.0 50.0   SRM. DN 500/PN 6
DN 500 645.0 70.0   SRM. DN 500/PN 6
DN 500 670.0 50.0   SRM. DN 500/PN 10
DN 500 670.0 70.0   SRM. DN 500/PN 10
DN 500 715.0 50.0   SRM. DN 500/PN 16
DN 500 730.0 50.0   SRM. DN 500/PN 25
DN 500 730.0 70.0   SRM. DN 500/PN 25
DN 500 755.0 50.0   SRM. DN 500/PN 40
DN 500 755.0 70.0   SRM. DN 500/PN 40
DN 600 755.0 50.0   SRM. DN 600/PN 6
DN 600 755.0 70.0   SRM. DN 600/PN 6
DN 600 780.0 50.0   SRM. DN 600/PN 10
DN 600 780.0 70.0   SRM. DN 600/PN 10
DN 600 840.0 50.0   SRM. DN 600/PN 16
DN 600 845.0 50.0   SRM. DN 600/PN 25
DN 700 860.0 50.0   SRM. DN 700/PN 6
DN 700 860.0 70.0   SRM. DN 700/PN 6
DN 700 895.0 50.0   SRM. DN 700/PN 10
DN 700 895.0 70.0   SRM. DN 700/PN 10
DN 700 910.0 50.0   SRM. DN 700/PN 16
DN 700 960.0 50.0   SRM. DN 700/PN 25
DN 800 975.0 50.0   SRM. DN 800/PN 6
DN 800 975.0 70.0   SRM. DN 800/PN 6
DN 800 1015.0 50.0   SRM. DN 800/PN 10
DN 800 1015.0 70.0   SRM. DN 800/PN 10
DN 800 1025.0 50.0   SRM. DN 800/PN 16
DN 800 1085.0 50.0   SRM. DN 800/PN 25
DN 900 1075.0 50.0   SRM. DN 900/PN 6
DN 900 1075.0 70.0   SRM. DN 900/PN 6
DN 900 1115.0 50.0   SRM. DN 900/PN 10
DN 900 1125.0 50.0   SRM. DN 900/PN 16
DN 900 1185.0 50.0   SRM. DN 900/PN 25
DN 1000 1175.0 50.0   SRM. DN1000/PN 6
DN 1000 1175.0 70.0   SRM. DN1000/PN 6
DN 1000 1230.0 50.0   SRM. DN1000/PN 10
DN 1000 1255.0 50.0   SRM. DN1000/PN 16
DN 1000 1320.0 50.0   SRM. DN1000/PN 25

All dimensions are given in mm. Other dimensions on request. Specifications subject to change.

Print data sheet Make an inquiry

News

  • EPS 100 Tapered Silicone Plugs - solid

    Designed to perfectly fit pipes, bore holes and internal threads. Conical shaft, without collar, solid construction, high temperature masking. Recommended for Powder coating, e-coating, plating & anodizing. Details →
    08.2021

  • EPS 125 Tapered Silicone Plugs - hollow core

    Conical shaft, without collar, lightweight construction with hollow core, Silicone rubber 55 shore A withstands temperatures up to max. 316 ° C / 4 hours. Details →
    09.2021

  • EPS 135 High Temperature Masking Tapered Silicone Pull Plugs

    For pipes, bore holes and internal threads. Recommended for Powder coating, e-coating, plating & anodizing. Details →
    10.2021

  • EPS 150 High Temperature Masking Silicone Cone Caps / Plugs

    Dual Role Application. Can be used as a plug or cap due to conical shaft design, ideal for closing grub screws, bolts and fitting bores with contact surfaces. Details →
    11.2021

PROTEC PLASTICS

PROTEC PLASTICS is the global market leading provider of protection and finishing solutions, manufacturing and distributing plastic protective caps and plugs, strain relief connectors and metal products.

Should you require information about i.e. Threaded Caps, Pipe Caps, Protective Plugs or Cable Glands, please contact the PROTEC PLASTICS sales team.

Imprint

PROTEC PLASTICS Sp. z o.o.
Ul. Stefana Okrzei 2
57-300 Kłodzko
Tel. +48 74 640 07 87
Mobile +48 694 252 843
info@protecplastics.pl

LinkedIn

Privacy Policy

© 2022 PROTEC PLASTICS - all rights reserved.

modified eCommerce Shopsoftware © 2009-2024
Parse Time: 0.271s